The Delta Device is designed to provide years of reliable operation given that it is properly installed as per instructions mentioned below prior to installation as under:

  1. Purchaser to follow the inlet and outlet flow of the water as per stickers pasted on the Device.
  2. Water should enter the Device through the pointed side of the inside core.
  3. Prior to start-up, all pipe lines needs to be properly cleaned and flushed to remove any dirt or debris from the system.
  4. We suggest you must bleed your water. Bleeding is an important factor, which can control scaling up to a certain extent. Bleeding % = Evaporation %/ n-1 , Where n= Number Of cycles.

For inquiries Get in touch with us